Configuration File Reference SIP_TLS_SRV_PREFIX_n
Local SIP Port
Description Specifies the source port number used by the unit for SIP
communication.
Value Range 1024–49151
Default Value 5060 (for Line 1)
5070 (for Line 2)
5080 (for Line 3)
5090 (for Line 4)
5100 (for Line 5)
5110 (for Line 6)
5120 (for Line 7)
5130 (for Line 8)
5140 (for Line 9)
5150 (for Line 10)
5160 (for Line 11)
5170 (for Line 12)
5180 (for Line 13)
5190 (for Line 14)
5200 (for Line 15)
5210 (for Line 16)
Note
KX-HDV130 Line 1-2
KX-HDV230 Line 1-6
KX-HDV330 Line 1-12
KX-HDV430 Line 1-16
Configuration File Reference SIP_SRC_PORT_n
SIP URI
Description Specifies the unique ID used by the SIP registrar server, which
consists of "sip:", a user part, the "@" symbol, and a host part, for
example, "sip:user@example.com", "2405551111_1".
Note
• When registering using a user ID that is not a phone number,
you should use this setting.
• In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 316 characters.
Value Range Max. 384 characters
Default Value Not stored.
Configuration File Reference SIP_URI_n
T1 Timer
Description Specifies the default interval, in milliseconds, between transmissions
of SIP messages.
4.5.2 SIP Settings [Line 1]–[Line n]
120 Administrator Guide Document Version: 2017-07
To Next Page
Loading...
