Default Value 5
Configuration File Reference MACRODIGIT_TIM
Enable # Key as delimiter
Description Selects whether the # key is treated as a regular dialed digit or a
delimiter, when dialed as or after the second digit.
Value Range
• Yes: # is treated as the end of dialing delimiter.
• No: # is treated as a regular dialed digit.
Default Value Yes
Configuration File Reference POUND_KEY_DELIMITER_ENABLE
International Call Prefix
Description Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference INTERNATIONAL_ACCESS_CODE
Country Calling Code
Description Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference COUNTRY_CALLING_CODE
National Access Code
Description When dialing a number from the incoming call log that contains a "+"
symbol and the country calling code matches, the country calling
code is removed and the national access code is added.
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference NATIONAL_ACCESS_CODE
Default Line for Outgoing
Description Selects the line used to make an outgoing call when no line is
specified in the dialing operation.
4.6.1 Call Control
Document Version: 2017-07 Administrator Guide 133
To Next Page
Loading...
