Panasonic KX-HDV130 - Reorder Tone

Tone Timings
Description Specifies the pattern, in milliseconds, of stutter dial tones to notify
that a voice mail is waiting, using up to 22 whole numbers (off 1, on 1,
off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
Configuration File Reference DIAL_TONE4_TIMING
4.6.6.5 Reorder Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Note
• If the value for this setting is "480,620", the unit will use a
mixed signal of a 480 Hz tone and a 620 Hz tone.
Default Value 480,620
Configuration File Reference REORDER_TONE_FRQ
Tone Timings
Description Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Default Value 60,250,190
Note
• Avoid setting 1–50 for any of the values.
Configuration File Reference REORDER_TONE_TIMING
4.6.6 Tone Settings
Document Version: 2017-07 Administrator Guide 149