File Name (For KX-HDV230)
Description Specifies the path of the firmware file to be imported.
Value Range No limitation
Note
• There are no limitations for the field entry. However, it is
recommended that paths of less than 256 characters be used:
longer paths may cause longer data transfer times and result in
an internal error.
Default Value Not stored.
4.7.4 Export Logging File
This screen allows you to specify the Logging File to export when logging.
4.7.4.1 Export Logging File
Logging File Type
Description Selects the Logging File Type setting.
Value Range
• Power Down
• Event
• SIP Packet
Note
• The line break code for the log file is <LF>.
• If a file is exported when Power Down is selected, the saved
file is power.log.
• If a file is exported when Event is selected, the saved file is
event_log.txt.
• If a file is exported when SIP Packet is selected, the saved file
is sip_trace_log.txt.
Default Value Power Down
4.7.4 Export Logging File
Document Version: 2017-07 Administrator Guide 161
To Next Page
Loading...
