Panasonic KX-HDV130 - Page 208

Description Specifies the IP address for the unit for IPv4.
Note
• This setting is available only when "CONNECTION_TYPE" is
set to "0".
• When you specify this parameter, you must specify
"STATIC_SUBNET" together in a configuration file.
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference IP Address
STATIC_SUBNET
Value Format IPADDR
Description Specifies the subnet mask for IPv4.
Note
• This setting is available only when "CONNECTION_TYPE" is
set to "0".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" together in a configuration file.
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference Subnet Mask
STATIC_GATEWAY
Value Format IPADDR
Description Specifies the IP address of the default gateway for the IPv4 network
where the unit is connected.
Note
• This setting is available only when "CONNECTION_TYPE" is
set to "0".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" and "STATIC_SUBNET " together in
a configuration file.
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference Default Gateway
USER_DNS1_ADDR
Value Format IPADDR
5.3.2 Basic Network Settings
208 Administrator Guide Document Version: 2017-07