Panasonic KX-HDV130 - Page 214

Description Specifies whether to enable or disable the LLDP-MED feature.
Note
• You should specify "Y" for only one of "LLDP_ENABLE", or
"VLAN_ENABLE". If "Y" is specified for two or more of the
parameters above, the settings are prioritized as follows:
VLAN_ENABLE >LLDP_ENABLE. Therefore, if "Y" is specified
for both "VLAN_ENABLE" and "LLDP_ENABLE", the VLAN-
related settings are used.
Value Range
• Y: Enable LLDP-MED
• N: Disable
Default Value
Y
Web User Interface Reference Enable LLDP
LLDP_INTERVAL
Value Format INTEGER
Description Specifies the interval, in seconds, between sending each LLDP
frame.
Value Range 1–3600
Default Value 30
Web User Interface Reference Packet Interval
LLDP_VLAN_ID_PC
Value Format INTEGER
Description Specifies the VLAN ID for the PC when LLDP is on.
Value Range 0–4094
Default Value 0
Web User Interface Reference PC VLAN ID
LLDP_VLAN_PRI_PC
Value Format INTEGER
Description Specifies the VLAN Priority for the PC when LLDP is on.
Value Range 0–7
Default Value 0
Web User Interface Reference PC Priority
CDP_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable the CDP feature.
5.3.3 Ethernet Port Settings
214 Administrator Guide Document Version: 2017-07