Panasonic KX-HDV130 - Page 290

Description Specifies the minimum value, in seconds, of the retry timer, which
determines the interval for re-sending REGISTER requests, when the
retry timer is set to be a random value.
Note
• This setting is available only when
"ENH_FOVR_RANDOM_TIMER_n" is set to "Y".
Value Range 10-86400
Default Value 10
SIP_INC_INVITE_RTP_MODE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies whether to send RTP after receiving a second INVITE.
Value Range
• 0: Start receiving RTP after receiving a second INVITE
• 1: Start sending/receiving RTP after receiving a second INVITE
Default Value 0
SIP_183_TALK_ENABLE
Value Format BOOLEAN
Description Specifies whether the unit's sate is "Talking" or "Calling" when it
receives a SIP 183 message.
Value Range
• Y: Talking
• N: Calling
Default Value
N
SEND_180_ALERT_ENABLE
Value Format BOOLEAN
Description Specifies whether to send 180 before an alert.
Value Range
• Y: Send 180
• N: Do not send 180
Default Value
N
INVITE_403_REGSEND_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to enable sending a REGISTER request to the SIP
server after receiving 403 error in response to an INVITE request.
Value Range
• Y: Enable
• N: Disable
5.3.22 SIP Settings
290 Administrator Guide Document Version: 2017-07