Panasonic KX-HDV130 - Settings Using Web User Interface Programming

Button Description Lamp Indication
Group Call
Pickup
Used to answer a group call as a
representative.
-
Network
Camera (For
KX-HDV430)
Used to connect to a Network
Camera. -
Presence Used to confirm the current status of
the extension assigned to the key.
-
My Phone Used to configure the current status of
My Phone.
-
*1
This is an optional feature and may not be supported on your phone system.
6.3.1 Settings using Web User Interface Programming
To set Flexible Keys
1.
In the Web user interface, click the [Telephone] tab, and then click [Flexible Key Settings].
2.
Enter settings as described in the following table.
When it is necessary to set both parameter 1 and parameter 2, enter a comma between the values.
Button
Parameter 1 Parameter 2
Description Value Description Value
One Touch Dial Phone Number Up to 32 digits Line No. 1–n
BLF (Busy Lamp
Field)
*1
Phone Number Up to 32 digits Line No. 1–n
Line Line No. 1–n - -
ACD Line No. 1–n - -
Wrap Up Line No. 1–n - -
Line Status - - - -
Call Forward Phone Number Up to 32 digits - -
Phonebook Classification
• 0: Local &
Remote
• 1: Local
Phonebook
• 2: Remote
Phonebook
Category 1–9
Call History Classification
• 0: Call History
• 1: Missed Calls
• 2: Incoming
Calls
• 3: Outgoing
Calls
- -
Simultaneous Ring Line No. 1–n - -
6.3.1 Settings using Web User Interface Programming
370 Administrator Guide Document Version: 2017-07