Value Range
• DHCP
• Static
Default Value DHCP
Configuration File Reference CONNECTION_TYPE
DHCP Host Name
Description Specifies the host name to option12 in DHCPv4 or option15 in
DHCPv6.
Note
• This setting is available only when [Connection Mode] is set
to [DHCP].
Value Range Max. 64 characters
Note
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
Default Value {MODEL}
Configuration File Reference DHCP_HOST_NAME
IP Address
Description Specifies the IP address for IPv4.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Not stored.
Configuration File Reference STATIC_IP_ADDRESS
Subnet Mask
Description Specifies the subnet mask for IPv4.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Not stored.
Configuration File Reference STATIC_SUBNET
4.3.1 Basic Network Settings
68 Administrator Guide Document Version: 2017-07