Panasonic KX-HDV130 - Maximum RTP Port Number; Telephone-Event Payload Type; Voice Quality Report; Server Address

Maximum RTP Port Number
Description Specifies the highest port number that the unit will use for RTP packets.
Value Range 1424–59998 (even number only)
Default Value 32766
Configuration File Reference RTP_PORT_MAX (Page 266)
Telephone-event Payload Type
Description Specifies the RFC 2833 payload type for DTMF tones.
Note
• This setting is available only when [DTMF Type] is set to
[RFC2833].
Value Range 96–127
Default Value 101
Configuration File Reference TELEVENT_PAYLOAD (Page 257)
4.5.3.2 Voice Quality Report
Server Address
Description Specifies the IP address or FQDN of the collector server.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference VQREPORT_COLLECTOR_ADDRESS (Page 270)
Port
Description Specifies the port of the collector server.
Value Range 1–65535
Default Value 5060
Configuration File Reference VQREPORT_COLLECTOR_PORT (Page 270)
Enable PUBLISH
Description Selects the sending type of the VQ report using PUBLISH.
128 Administrator Guide Document Version 2015-12
4.5.3 VoIP Settings