Panasonic KX-HDV130 - International Call Prefix; Country Calling Code; National Access Code; Default Line for Outgoing

Value Range
• Yes: # is treated as the end of dialing delimiter.
• No: # is treated as a regular dialed digit.
Default Value Yes
Configuration File Reference POUND_KEY_DELIMITER_ENABLE (Page 275)
International Call Prefix
Description Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference INTERNATIONAL_ACCESS_CODE (Page 295
)
Country Calling Code
Description Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference COUNTRY_CALLING_CODE (Page 295)
National Access Code
Description When dialing a number from the incoming call log that contains a "+"
symbol and
the country calling code matches, the country calling code
is removed and the national access code is added.
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference NATIONAL_ACCESS_CODE (Page 295)
Default Line for Outgoing
Description Selects the line used to make an outgoing call when no line is specified
in the dialing operation.
Value Range
• Line 1
• Line 2
Default Value Line 1
Configuration File Reference DEFAULT_LINE_SELECT (Page 291)
Document Version 2015-12 Administrator Guide 137
4.6.1 Call Control