Directed Call Pickup
Description Specifies the feature number assigned to a BLF for performing call
pickup.
Value Range 0–4 digits (0–9, *, #)
Default Value Not stored.
Configuration File Reference NUM_PLAN_PICKUP_DIRECT (Page 279)
4.6.1.2 Emergency Call Phone Numbers
1–5
Description Specifies the phone numbers used for making emergency calls. A user
can dial any of the specified phone numbers at any time regardless of
any restrictions imposed on the unit. A maximum of 5 phone numbers
can be specified.
Value Range Max. 32 characters (except &, ", ', :, ;, <, >)
Default Value Not stored.
Configuration File Reference EMERGENCY_CALLx (Page 297)
4.6.1.3 Call Rejection Phone Numbers
1–30
Description Specifies the phone numbers to reject incoming calls from. A maximum
of 30 phone numbers can be specified.
Value Range Max. 32 characters (except &, ", ', :, ;, <, >)
Default Value Not stored.
Configuration File Reference CALL_REJECTIONx (Page 297)
Document Version 2015-12 Administrator Guide 139
4.6.1 Call Control