Panasonic KX-HDV130 - Upgrade Firmware; Firmware File URL; Export Logging File; Logging File Type

4.7.3.1 Upgrade Firmware
Firmware File URL
Description Specifies the URI where the firmware file is stored.
Value Range Max. 384 characters
Default Value Not stored.
4.7.4 Export Logging File
This screen allows you to specify the Logging File to export when logging.
4.7.4.1 Export Logging File
Logging File Type
Description Selects the Logging File Type setting.
Value Range
• Power Down
• Event
• SIP Packet
Note
• The line break code for the log file is <LF>.
• If
a file is exported when Power Down is selected, the saved file
is power.log.
• If a file is exported when Event is selected, the saved file is
event_log.txt.
• If a file is exported when SIP Packet is selected, the saved file
is sip_trace_log.txt.
Default Value Power Down
4.7.5 Reset to Defaults
This screen
allows you to reset the carrier default settings made through the Web user interface to their default
values by clicking [Reset to Carrier Defaults]. After you click this button, a dialog box is displayed, asking
whether you want to reset the settings. Click OK to reset, or Cancel not to.
Document Version 2015-12 Administrator Guide 157
4.7.5 Reset to Defaults