Panasonic KX-HDV130 - Macrodigit_Tim

MACRODIGIT_TIM
Value Format INTEGER
Description Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
Value Range 1–15
Default Value 5
Web User Interface Reference Timer for Dial Plan (Page 136)
INTERNATIONAL_ACCESS_CODE
Value Format STRING
Description Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains
"+".
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Note
• No other characters are allowed.
Default Value Empty string
Web User Interface Reference International Call Prefix (Page 137)
COUNTRY_CALLING_CODE
Value Format STRING
Description Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Value Range Max. 8 characters (consisting of 0–9)
Default Value Empty string
Web User Interface Reference Country Calling Code (Page 137)
NATIONAL_ACCESS_CODE
Value Format STRING
Description When dialing a number from the incoming call log that contains a "+"
symbol and
the country calling code matches, the country calling code
is removed and the national access code is added.
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Empty string
Web User Interface Reference National Access Code (Page 137)
Document Version 2015-12 Administrator Guide 295
5.3.33 Call Control Settings