Panasonic KX-HDV130 - Hold_And_Call_Enable

HOLD_AND_CALL_ENABLE
Value Format BOOLEAN
Description Specifies whether making new call after holding the call or not.
Value Range
• Y: Enable (Hold and Call)
• N: Disable (Hold)
Default Value
N
AUTO_CALL_HOLD
Value Format BOOLEAN
Description Specifies whether calls are disconnected or held when an other line is
selected while having a conversation.
Value Range
• Y (Enable Auto Call Hold)
• N (Disable Auto Call Hold)
Default Value
Y
SIP_RESPONSE_CODE_DND
Value Format INTEGER
Description Specifies the response code when a call is received in Do Not Disturb
mode.
Value Range 400–699
Default Value 403
SIP_RESPONSE_CODE_CALL_REJECT
Value Format INTEGER
Description Specifies the response code when a call is rejected.
Value Range 400–699
Default Value 603
CW_ENABLE_n
Parameter Name Example CW_ENABLE_1, CW_ENABLE_2
Value Format BOOLEAN
Description Specifies whether automatic call waiting is enabled.
300 Administrator Guide Document Version 2015-12
5.3.33 Call Control Settings