Panasonic KX-HDV130 - XSI Service Settings

6.3.2 XSI Service Settings
Phone settings for using XSI services can be set using configuration parameters or the Web user interface
(administrators only).
See 4.3.7 Xtended Service Settings for making settings using the Web user interface.
The following parameter names will be displayed and can be set as needed.
Parameter Name Description Reference
XSI_ENABLE Enables XSI services. Page 209
XSI_SERVER Specifies the XSI server. Page 209
XSI_SERVER_TYPE Specifies the communication method. Page 209
XSI_SERVER_PORT Specifies the port used for communication with the XSI server. Page 209
XSI_USERID_n Specifies the user name for each user (account) that will use
XSI.
Page 210
XSI_PASSWORD_n Specifies the password for each user (account) that will use
XSI.
Page 210
XSI_PHONEBOOK_E
NABLE_n
Specifies whether to enable or disable the Xsi phonebook
service.
Page 210
XSI_PHONEBOOK_T
YPE_n
Specifies the type of Xsi phonebook. Page 210
XSI_CALLLOG_ENAB
LE_n
Specifies whether to enable or disable the Xsi call log service. Page 211
Note
To change settings for the following XSI services using a unit, the parameter
ADMIN_ABILITY_ENABLE="Y" (see Page 297) must be set. (When ADMIN_ABILITY_ENABLE="N" is
set, the settings can only be viewed.)
• Remote Office ("Remote Office")
• AnyWhere ("Anywhere
")
• Simultaneous Ring Personal ("SimultaneousRing")
• Calling Line ID Delivery Blocking ("Anonymous Call")
• Anonymous Call Rejection ("Block Anonymous")
Note
The text in parentheses are shown on the unit display.
Operations for accessing the above XSI services
1.
2. [ ]/[ ]: "Basic Settings" ®
OK
3. [ ]/[ ]: "Call Settings" ®
OK
4. [ ]/[ ]: "Remote Office","Anywhere","SimultaneousRing","Anonymous Call", or "Block
Anonymous" ®
OK
316 Administrator Guide Document Version 2015-12
6.3.2 XSI Service Settings