Panasonic KX-HDV130 - Customizing the Telephone

Maintenance
Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Provisioning
Maintenance
Provisioning
Maintenance
Standard File URL
*3
ü
Page 154
Product File URL
*3
ü
Page 154
Master File URL
*3
ü
Page 154
Cyclic Auto Resync
*3
ü
Page 154
Resync Interval
*3
ü
Page 154
Time Resync
*3
ü
Page 155
Header Value for Resync
Event
*3
ü
Page 155
Firmware
Maintenance
Firmware Maintenance Enable Firmware Update
*3
ü
Page 156
Firmware File URL
*3
ü
Page 156
Upgrade
Firmware
Upgrade Firmware Firmware File URL
ü
Page 157
Export Logging
File
Export Logging File Logging File Type
ü
Page 157
Reset to Defaults Reset to Carrier Defaults The following settings will be
reset to carrier default values
when you click [Reset to
Carrier Defaults].
ü
Page 157
Restart Restart Click [Restart] to proceed.
Restarting will take a few
moments.
ü
Page 158
*1
The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
*2
This setting can also be configured through other programming methods
(phone user interface programming or configuration file
programming).
*3
This setting can also be configured through configuration file programming.
4.2 Status
This section provides detailed descriptions about all the settings classified under the [Status] tab.
Document Version 2015-12 Administrator Guide 69
4.2 Status