Panasonic KX-HDV130 - Vlan; Enable VLAN; IP Phone VLAN ID; IP Phone Priority

Default Value 0
Configuration File Reference LLDP_VLAN_PRI_PC (Page 187)
4.3.2.3 VLAN
Enable VLAN
Description Selects whether to use the VLAN feature to perform VoIP
communication securely.
Note
• You should specify "Yes" for only one of "Enable LLDP", or
"Enable VLAN".
• If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows:
"
Enable VLAN" >
"Enable LLDP". Therefore, if "Yes" is specified for both
"Enable VLAN" and "Enable LLDP", the VLAN-related
settings are used.
Value Range
• Yes
• No
Default Value No
Configuration File Reference VLAN_ENABLE (Page 185)
IP Phone VLAN ID
Description Specifies the VLAN ID for the IP Phone.
Value Range 0–4094
Default Value 2
Configuration File Reference VLAN_ID_IP_PHONE (Page 185)
IP Phone Priority
Description Selects the priority for the IP Phone.
Value Range 0–7
Default Value 7
Configuration File Reference VLAN_PRI_IP_PHONE (Page 186)
PC VLAN ID
Description Specifies the VLAN ID for the PC.
84 Administrator Guide Document Version 2015-12
4.3.2 Ethernet Port Settings