Panasonic KX-HDV130 - Port (Group 1-5); Priority (Group 1-3); Label (Group 1-5); Enable Transmission (Group 1-5)

Port (Group 1–5)
Description Specifies the port number for multi-cast paging
for each channel group.
Value Range 1–65535
0: Disable
Default Value 0
Configuration File Reference MPAGE_PORTm (Page 223)
Priority (Group 1–3)
Description Selects the priority of the low priority channel group.
The priority of multi-cast paging group1
-3 is lower than the talking.
Priority 4 is higher than Priority 5.
Value Range 4, 5
Default Value 5
Configuration File Reference MPAGE_PRIORITYm (Page 224)
Label (Group 1–5)
Description Specifies a label for each channel group.
Value Range Max. 24 characters
Default Value Not stored.
Configuration File Reference MPAGE_LABELm (Page 224)
Enable Transmission (Group 1–5)
Description Selects the sending multi-cast paging.
Value Range
• Yes
• No
Default Value No
Configuration File Reference MPAGE_SEND_ENABLEm (Page 224)
90 Administrator Guide Document Version 2015-12
4.3.5 Multicast Paging Settings