*1
60 mm (2 3/8 in) or less
Use a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or less.
When connecting to a switching hub
If PoE is available, an AC adaptor is not needed.
If you are using a PoE hub, the number of devices that you can connect simultaneously is limited by the
amount of power supplied by the hub.
KX-HDV130: This unit complies with the PoE Class 1 standard.
KX-HDV230: This unit complies with the PoE Class 2 standard.
When connecting a PC
The PC port does not support PoE for connected devices.
When connecting cables and the AC adaptor
Pass the Ethernet cable and the AC adaptor cord under the stand.
2.2.5 Connections (including optional KX-HDV20)
Document Version: 2017-08 Operating Instructions 21
To Next Page
Loading...
