Panasonic KX-HDV130 - Page 23

*1
*1 DSS cover
2. Fasten the wall mounting adaptor to the base with the small screw.
(Recommended torque: 0.4 N·m [4.08 kgf·cm / 3.54 lbf·in] to 0.6 N·m [6.12 kgf·cm / 5.31 lbf·in])
3. Connect the AC adaptor, handset cord, Ethernet cables, and connection cable as necessary.
4. Drive the large screws into the wall either 83 mm (3 1/4 in) or 100 mm (3 15/16 in) apart, and mount the
unit on the wall.
KX-HDV130
*4
*5
*1
*3
*6
*7
2 4
*2
*1 40 mm (1 37/64 in) or less
*2 AC adaptor
*3 Ethernet cables
*4 Washer
*5 Drive the screw to this point.
*6 83 mm (3 1/4 in)
*7 100 mm (3 15/16 in)
2.2.6 Wall Mounting
Document Version: 2017-08 Operating Instructions 23