Panasonic KX-HDV130 - Adjusting the Volume; Entering Characters

2.8.2 Adjusting the Volume
Adjusting the Receiver/Speaker/Headset Volume
1. Press the [
] or [ ] volume key to adjust the volume during a conversation.
Note
• Both receiver volume and headset volume are adjusted in training mode. See "3.4.9 Using Training
Mode (KX-HDV230 only) ".
Adjusting the Ringer Volume or Turning the Ringer Off
1. In standby mode, press the [
] or [ ] volume key to adjust the ringer volume.
Adjusting the Ringer Volume or Turning the Ringer Off while Ringing
While receiving a call, do the following to adjust the ringer volume or turn the ringer off.
Note
• If you attach a headset while receiving an incoming call, ringing will be heard from the speaker.
To adjust the ringer volume
1. Press the [ ] or [ ] volume key to adjust the ringer volume.
Note
• The adjusted volume level will also be used for subsequent calls.
2. Press
Back
to exit.
To turn the ringer off
1. Press
.
2.8.3 Entering Characters
You can enter characters and digits using the dialing keys.
You can select one of the character modes by pressing the Right Soft Key while entering a name. The
function icon above the soft key displays the current character mode.
To change the character mode while editing a name in the Phonebook, press the Right Soft Key.
For available characters, see “5.1 Character Mode Table".
Suffix: [none] / C Suffix: NE / X / SX Suffix: RU
ABC
(Latin)
↓
0 - 9
(Numeric)
↓
(Extended 1)
ABC
(Latin)
↓
0 - 9
(Numeric)
↓
(Greek)
↓
(Extended 1)
↓
(Extended 2)
(Cyrillic)
↓
0 - 9
(Numeric)
↓
ABC
(Latin)
↓
(Extended 1)
↓
(Extended 2)
2.8.2 Adjusting the Volume
Document Version: 2017-08 Operating Instructions 45