Panasonic KX-HDV130 - Checking the Line Status

3.7 Checking the Line Status
You can check the status of each line (KX-HDV130: up to 2 lines, KX-HDV230: up to 6 lines) on the display.
In Standby Mode
1. Press
Menu
.
2. Press [▲] or [▼] to select "Line Status", and then press
OK
.
3. Press [▲] or [▼] to select the line whose status you want to check.
4. Press
/ CANCEL to end checking the line status or press
OK
to perform an action.
Note
• When a function key is assigned as a Line Status key, you can press that function key to display the
line status screen.
During a Conversation
1. Press
Line
.
2. Press [▲] or [▼] to select the line whose status you want to check.
3. Press / CANCEL to end checking the line status or press
OK
to perform an action.
Note
• When a function key is assigned as a Line Status key, you can press that function key to display the
line status screen.
Line status indication
Status Display Meaning Action
Free
*1
The line is idle. Seize the line for dialing.
<n> Free
*1
A shared line is idle. Seize the line for dialing.
In Use (KX-HDV230 only) The line is on a call. —
Line On Hold
*2
The line is on hold. Retrieve the call on hold.
Incoming Call (KX-HDV230
only)
*2
The line is receiving a call. Answer the call.
Recall (KX-HDV230 only)
*2
The line is receiving a Hold Recall
signal.
Answer the call.
<x> In Use
*3
A shared line is in use at another unit. Join the call.
<x> Line On Hold
*3
A shared line is on hold at another unit. Retrieve the call on hold.
*1
The following icons are also displayed if the corresponding feature is enabled.
Icon Meaning
Call Forwarding
Do Not Disturb
Making an anonymous call
3.7 Checking the Line Status
66 Operating Instructions Document Version: 2017-08