To access the camera image/recording list screen, tap the desired camera from the [HomeHawk] app
home screen ( “Front door camera and outdoor camera home screen”, Page 21).
A Used to switch between available cameras G Displays a recording list of all images of the
selected camera
( “Playing back recordings”, Page 89)
B Shows the camera’s name H Takes snapshots
( “Taking snapshots”, Page 88)
C Shows the access point’s name I Starts/stops recording
( “Recording camera images (manual
recording)”, Page 88)
D Shows the battery level
( “Camera battery level”, Page 94)
J Enables talking with the camera
( “Talking to the camera”, Page 88)
E Shows the live camera image K Indicates that by tapping the camera image
(E) or this icon (K), the camera image can
be enlarged and the live camera image
screen ( “Viewing the live camera image
screen”, Page 86) can be accessed
F Shows today’s recorded image list for the
selected camera
Note:
R If only 1 camera is registered to the access point, the camera image/recording list screen is displayed
when you start the app.
R When connected away from home,
or is displayed next to the camera’s name. See
“Accessing while away from home”, Page 18 for more information.
85
Using a front door camera and outdoor camera
To Next Page
Loading...
