Installation Manual
Baby Monitor
Additional camera
Model No. KX-HNC301
Thank you for purchasing a Panasonic product.
This unit is an additional camera compatible with the following
series of Panasonic Baby Monitor:
– KX-HN3001/KX-HN3051
You must register this camera with your baby monitor before
it can be used. This installation manual describes only the steps
needed to register and begin using the camera. Please read the
baby monitor’s operating instructions for further details.
Please read this installation manual before using the unit and save it for
future reference.
For U.S.A. users
For assistance, please contact us at 1-800-272-7033 or visit our Web
site: http://shop.panasonic.com/support for customers in the U.S.A.
For Canada users
For assistance, please visit our support page on:
www.panasonic.ca/english/support
www.panasonic.ca/french/support
(Camera Model No. KX-HNC300)
FrançaisEspañol
English
To Next Page
Need help?
General
