Panasonic KX-HTS824 - Software Upgrading

5.2 Software Upgrading
Obtaining software updates (downloading the update to the PBX) can be done manually via Web
Maintenance Console. In this case, software updates can be obtained from a USB memory device
connected to the PBX, or a PC that can access Web Maintenance Console.
The software of the following types of devices and components can be updated:
Data Type Description
Main unit software Main unit software on the PBX’s motherboard.
Terminal software
*1
Firmware of supported SIP extensions.
*1
Only Panasonic telephones are supported. For details about a specific telephone, refer to the telephone's documentation.
Note
• To transfer files from USB memory to HTS, store them in the directory below.
/private/meigroup/psn/hts/update/
• The version of main unit and terminal software can be confirmed through Web-MC.
• To transfer files from Web-MC to HTS, refer to "4.3.1 Maintenance—[2-1] System Control—Firmware
Transfer to PBX" in the Programming Item List.
• To update main unit software, refer to "4.3.2 Maintenance—[2-2] System Control—Firmware Update"
in the Programming Item List.
• Either one Main Unit Software or one Terminal Software is stored in the HTS. If a new Software is
stored when there is already stored Software, the latter will be overwritten.
• Upon a version up failure, the system automatically reverts back to the former main unit software.
• Version up failures and automatic reversions to the former main unit software are recorded in the
error log.
• The version up log containing the error log can be accessed/retrieved from the Web-MC. For more
information, refer to 4.4.2 Maintenance—[3-2] Utility—System Log in Programming Item List.
• For information on updating terminal software, refer to the corresponding manuals.
5.2 Software Upgrading
Getting Started 103