2.3 Specifications
2.3.1 General Description
Power Input AC 100-240 V, 50/60 Hz, 1.3-0.9A
Power Supply
Unit (PSU)
Power consumption: 60W
External Backup
Battery
External battery port is supported (DC 12 V). For more information, refer to
3.2.10 Backup Battery Connection.
Real Time Clock Lithium battery back up
Data retention period 7 years
Dialing Trunk Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialing with Caller ID (FSK/DTMF)
Extension Tone (DTMF) Dialing with Caller ID (FSK)
Ring Frequency 20 Hz/25 Hz (selectable)
Operating
Environment
Temperature 0 ℃ to 40 ℃ (32 ℉ to 104 ℉) (forced cooling by using a FAN)
Humidity 10 % to 90 % (non-condensing)
Ethernet Port WAN port 10BASE-T / 100BASE-TX / 1000BASE-T RJ45 x 1 for SIP
Trunks/Internet access
WAN/LAN port 10BASE-T / 100BASE-TX / 1000BASE-T RJ45 x 1 WAN for
SIP Trunks/Internet access
LAN for SIP extensions/Maintenance/Mirroring
LAN port 10BASE-T / 100BASE-TX / 1000BASE-T RJ45 x 1 for SIP
extensions/Maintenance
Wireless LAN Antenna Built-in antenna
Transmission
method
2 x 2 MIMO
Communication
standard
IEEE802.11n/b/g
Frequency range
(center
frequency)/
Channel
– For North America / Latin America except Brazil / Taiwan:
2.412 GHz - 2.462 GHz (1 - 11ch)
– For all other countries / areas:
2.412 GHz - 2.472 GHz (1 - 13ch)
Peak
transmission
power
100 mW
Security Open System (WEP64/WEP128) etc.
Wireless LAN
SETUP
PBC method (push button method)
USB port USB 2.0 Type-A connector x1
Dimension 297 mm (W) x 210 mm (H) x 90.4 mm (D)
(11-3/4 in x 8-1/4 in x 3-1/2 in)
2.3 Specifications
Getting Started 27
To Next Page
Loading...
