Maximum number of specific service
Maximum number of specific services will be managed for the items listed below.
Item
Max.
No.
Description
Number of remote internal lines
active at the same time
2 Management of the number of internal lines set as
Remote(MRG) in Phone Location settings under SIP
internal lines (Remote internal lines)
(note 1)
Number of video calls active at
the same time
2 The number of SIP internal lines when Video support is
enabled
Number of SLT devices active at
the same time
16 The number of SLT when line is off-the-hook (including
when in active use)
Note 1) When G729 is contained in used codec settings, the SIP trunk’s maximum number of
concurrent calls is 4. The maximum number of calls can be set by the SIP trunk number and
Remote SIP Extension number from “Reserved concurrent G.729 call” in the System Options
settings (refer to 2.2.6 PBX Configuration—[1-6] System—System Options in Programming
Item List). Select any listed below.
SIP Trunk=3 / Remote SIP Extension=1
SIP Trunk=2 / Remote SIP Extension=2
No Reservation
Main Unit
Right Side View (The cable cover is open.)
Inside View (The front cover is open.)
A Dummy cover plates for Extension Card Slots
B Dummy cover plates for Trunk/Doorphone Card Slots
C Trunk/Doorphone Card Slot
D Extension Card Slot
Maximum Optional Service Cards
The following number of card can be installed in the Physical Slots of the PBX.
Note
• Any card that exceeds the capacity of the PBX will be ignored.
2.3.3 System Capacity
Getting Started 31
To Next Page
Loading...
