Panasonic KX-HTS824 - 3.8 Starting the PBX

User-supplied (not included): RJ11 connector, Copper wire
Note
• Power failure Transfer feature between LCOT and SLC is not supported.
• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "3.8 Starting the PBX".
PIN Assignments
LINE 5-8 RJ11×4 Connector
No. Signal Name
Input (I)/
Output (O)
Function
3A 4A 3B 4B 3C 4C 3D 4D
3A FXO-A-TIP － CO Tip Port5
4A FXO-A-RING － CO Ring Port5
3B FXO-B-TIP － CO Tip Port6
4B FXO-B-RING － CO Ring Port6
3C FXO-C-TIP － CO Tip Port7
4C FXO-C-RING － CO Ring Port7
3D FXO-D-TIP － CO Tip Port8
4D FXO-D-RING － CO Ring Port8
3.3.3 SLC8 Card (KX-HT82470)
Function
8-port extension card for SLTs with Caller ID (FSK) control.
(1)
A
A RJ11
(1) To Extension
Accessories and User-supplied Items
Accessories (included): Spacer x 3
User-supplied (not included): RJ11 connector, Copper wire
Note
• Power failure Transfer feature between LCOT and SLC is not supported.
3.3.3 SLC8 Card (KX-HT82470)
64 Getting Started