Panasonic KX-HTS824 - Programming Information; Overview of Web Maintenance Console; PC Connection

3.9 Programming Information
3.9.1 Overview of Web Maintenance Console
Web Maintenance Console is designed to serve as an overall system programming reference for the PBX.
You can program and control the PBX over an IP network using Web Maintenance Console.
This section describes programming basic items using Web Maintenance Console.
Note
The contents and design of the software are subject to change without notice.
3.9.2 PC Connection
The Main Unit has a LAN port for PC to program PBX. A PC can be connected through LAN connection.
Port Default IP Address Default Subnet Mask
LAN Port 192.168.0.101 255.255.255.0
Direct Connection
To LAN Port
LAN Port
Notice
When connecting the PC to the LAN port, if the PC is set to obtain the IP address automatically, the IP
address of the PC will be set to an appropriate IP address to establish a connection to the PBX.
3.9 Programming Information
Getting Started 87