3.13 WAN Connection
Description
The following WAN connection types are supported.
WAN Type Description
Dynamic IP Address Retrieves an IP address dynamically from a DHCP server.
Static IP Address Sets a static IP address.
PPPoE Obtains an IP address dynamically from a PPPoE server.
You can confirm the current connection status of the WAN interface in Web Maintenance Console.
For details about the WAN Status, refer to "3.2.2 Network Configuration—[3-2] WAN—WAN Status" in the
Programming Item List.
Conditions
• If the LAN2/WAN2 port attribute is changed, you must perform a System Reset and restart the PBX
before the setting can be applied.
• For details about what values to use for configuring the protocol for specifying an IP address, consult the
network administrator.
3.13 WAN Connection
98 Getting Started
To Next Page
Loading...
