Before modification: 050-1234-5678
↓
After modification: 9-050-1234-5678 (Add "9")
CLI Destination
Directs an incoming call to a pre-programmed destination when the modified number matches the number in
the System Speed Dialing table.
For the incoming call destination setting of System Speed Dialing, the extension number (including floating
extension number) and "Disconnect" can be set as CLI Destination. When "Disconnect" is set, incoming
calls will be disconnected. (Refer to 3.3.1 System Speed Dial)
Searching for the caller name
If System Speed Dialing is searched for the modified number, and the caller name corresponding to the
modified number is registered, the name information of the caller (Display Name) registered in System
Speed Dialing will be sent to an extension when calling the extension. Whether Caller ID or Display Name is
displayed depends on the extension.
For the modification flow of caller numbers, see below:
3.1.1 Calling Line Identification (CLI) Distribution & Call Block
Feature Manual 21
To Next Page
Loading...
