Panasonic KX-HTS824 - Page 33

Incoming call to extension group
Group FWD
ALL settings valid?
For incoming call to extension group:
FWD
destination rings
Disconnected
*3: Includes incoming Call Waiting calls of extension members. However, extensions with DND settings will not receive the call.
All members will be rung and the NA timer will start at the time of incoming Hunting group calls.
*4: Call will fail and be disconnected when all members’ incoming calls fail at the time of incoming Hunting group calls.
The operation at time of an incoming DISA call follows the settings of DISA Busy Mode (disconnect or transfer to other
DISA incoming call).
Invalid
Invalid
Success
Valid
Valid
Valid
Invalid
(Incoming call from
analog trunk)
Invalid
(Incoming call from
not analog trunk)
No
(Incoming call answered)
Yes
Yes
No
Start FWD NA timer
Continue incoming call
FWD NA timer
timeout?
Group FWD
NA or FWD Busy &
NA settings valid?
Start incoming call
to group members
*3
Group FWD
Busy or FWD Busy &
NA settings valid?
Failure
(All member extensions
are busy, fault, etc.)
*4
Call start
Transfer recall to the
person who made
transfer operation
Transfer call?
Operation
[FWD Set/Cancel (For extensions only)]
An extension user can Set/Cancel call forwarding by a feature number.
(Refer to 2.1.1 Feature Number Lists for User)
3.1.9 Call Forwarding (FWD)
Feature Manual 33