Panasonic KX-HTS824 - Line Access, Trunk Line Group; Line Access, Trunk Line

Conditions Note
Extension users can make an outside call without entering the Idle
Line Access (Local Line Access) number in the following case:
The Idle Line Access (Local Line Access) number is not set in the
system, and the outside telephone number does not match the
registered extension number or feature number.
See 3.5.1 ARS
In the Web Maintenance Console setting, the installer can specify
the Idle Line Access number to be used for each extension.
Refer to 2.3.1 PBX Configuration
—[2-1] Extension—Port-1.Port－
Main-Trunk Call Block in
Programming Item List.
PIL Reference
2.2.6 PBX Configuration—[1-6] System—System Options
2.4.1 PBX Configuration—[3-1] Trunk—Port
3.2.3 Line Access, Trunk Line Group
Description
An extension user can select an idle trunk line from the corresponding trunk line group by dialing the Trunk
Line Group Access number and a trunk line group number.
Operation
Dial the Trunk Group Access number, specify a trunk group number to seize a trunk, and then dial the
number to be called.
(Refer to 2.1.1 Feature Number Lists for User)
Conditions
Conditions Note
Each trunk can be disabled by setting Attribution to No Connect in
Web Maintenance Console.
In the Web Maintenance Console setting, the installer can specify
the Idle Line Access number to be used for each extension.
Refer to 2.3.1 PBX Configuration
—[2-1] Extension—Port-1.Port－
Main-Trunk Call Block in
Programming Item List
PIL Reference
2.4.1 PBX Configuration—[3-1] Trunk—Port
3.2.4 Line Access, Trunk Line
Description
An extension user can select a Trunk line directly by dialing the Trunk Line Access number and a Trunk line
number.
Operation
Dial the Trunk Line Access number, specify a Trunk line number, and then dial the number to be called.
(Refer to 2.1.1 Feature Number Lists for User)
3.2.3 Line Access, Trunk Line Group
Feature Manual 39