Column Item
*1
Description
15 Unique ID Used as developer’s information.
*1
Item names are not recorded in the CDR file.
[Channel Information]
Terminal/
Extension type
Channel
Information
Note
SLT
Analog trunk
Doorphone
DAHDI/n-m n indicates the port number as follows:
• n = 1—8: Trunk port (1—8)
• n = 9—32: Extension port (1—24)
• n = 33—34: Doorphone port (1—2)
m is used as developer’s information.
SIP phone SIP/n-yyyyyyyy n shows SIP phone user name. Refer to SIP User Name in
2.3.1 PBX Configuration—[2-1] Extension—Port in the
Programming Item List.
yyyyyyyy is used as developer’s information.
SIP trunk SIP/n-qqqqqqqq n indicates information as follows:
• “carrier1_”: Carrier 1
• “carrier2_”: Carrier 2
• Authentication ID: SIP carrier’s Authentication ID. Refer to
2.4.7 PBX Configuration—[3-7] Trunk—SIP Trunk
Property in the Programming Item List.
qqqqqqqq is used as developer’s information.
[Example]
When the following operations are performed, CDR data is recorded as follows:
Pattern A: Extension (102) calls to extension (201). Extension (201) answers the call, and starts the
conversation.
Account
Code
Caller Callee
Source
Channel
Destination
Channel
Feature Option 1 Option 2
102 201
SIP/
name-00e
e9a70
DAHDI/9-1 Dial
DAHDI/
9,30,
Start Time
Answer
Time
End Time
Total
Duration
Talking
Duration
Status Unique ID
2016/6/9
16:38:49
2016/6/9
16:38:51
2016/6/9
16:38:54
5 3 ANSWERED 1465457929
Pattern B:
Extension (201) uses an Account code to call an analog trunk.
(Account code: 55555, destination number: 1234567890, Analog trunk port: 4)
3.12.2 CDR (Call Detail Record)
64 Feature Manual
To Next Page
Loading...
