Panasonic KX-HTS824 - Page 18

2.1.4 Typical Network Setting Example
2.1.4 Typical Network Setting Example
An example of typical network connection is shown below.
(1) When installing in an office that already has a network infrastructure.
Note
- Dynamic Host Configuration Protocol (DHCP) Server
Descri
p
tion
The PBX has a built-in DHCP server. When the DHCP server is enabled, the PBX will automatically
assign IP addresses to other devices on the network.
Using a DHCP server simplifies network management by removing the need to assign
IP addresses to devices manually.
Notice
• If an external DHCP server is in use, the DHCP Server feature of the PBX must be disabled.
For details about DHCP server settin
g
s, refer to "Network Confi
g
uration-
[
4-2
]
LAN Settin
g
s-◆DHCP Mod
e
in the Programming Item List.