Panasonic KX-HTS824 - 3.8 Starting the PBX

3.8 Starting the PBX
3.8 Starting the PBX
WARNING
Make sure that the AC outlet is properly earthed, then securely connect the 3-pin AC plug including
the earthed pin.
CAUTION
• Use onl
y
the AC
p
ower cord included with the PBX.
• Before touching the product (PBX, cards, etc.), discharge static electricity by touching ground or
wearing an earthing strap. Failure to do so may cause the PBX to malfunction due to static electricity.
• Once
y
ou have started the PBX, if
y
ou un
p
lu
g
the PBX, do not initialise it a
g
ain as described in "S
y
stem
Initialisation Procedure". Otherwise,
y
our
p
ro
g
rammed data will be cleared. To restart the PBX, refer
to "6.1.4 Restartin
g
the PBX".
• The plug of power supply cordset is used as the main disconnect device. Ensure that the AC outlet is
located near the equipment and is easily accessible.
C
onnectin
g
the A
C
Power
C
ord
Note
For safety reasons, do not stretch or pinch the AC power cord.