Panasonic KX-HTS824 - 5.1 System Data Backup and Restore

5. Maintenance
5.1 System Data Backup and Restore
A PBX’s system data can be backed up to a USB memory device inserted into the PBX’s USB port or to a PC in
the PBX’s LAN network. At a later time, the backed u
p
data can be restored to the PBX.
To back up the system data to a USB memory device
・Insert a USB memor
y
device into the USB
p
ort of the PBX.
・For details about backin
g
u
p
the s
y
stem data to a USB memor
y
device, refer to "Maintenance-
[
2-3
]
S
y
stem
Control-S
y
stem Data Backu
p
-◆S
y
stem Data Backu
p
" in the Pro
g
rammin
g
Item List.
Note
• The USB memor
y
device must be com
p
atible for use with the PBX. For details, refer to
"3.7 Connection of Peripherals".
Restoring backed up data from a USB memory device to a PBX
・For details about restorin
g
backed u
p
data stored on a USB memor
y
, refer to "Maintenance-
[
2-3
]
S
y
stem
Control-S
y
stem Data Backu
p
-◆S
y
stem Data Restore" in the Pro
g
rammin
g
Item List.
Note
・Data cannot be restored in the followin
g
cases.
• The USB memory device hardware is faulty.
• The data on the USB memory device has become corrupted.
• The USB memory device is removed from the USB port of the PBX during the restoration process.
・After a s
y
stem data restore, the main unit must be restarted usin
g
the Web Maintenance Console.
To back up the s
y
stem data to a PC
・For details about backin
g
u
p
the s
y
stem data to a PC, refer to "Maintenance-
[
2-3
]
S
y
stem
Control-S
y
stem Data Backu
p
-◆S
y
stem Data Backu
p
" in the Pro
g
rammin
g
Item List.
Restorin
g
backed u
p
data from a PC to a PBX
・For details about restorin
g
backed u
p
data stored on a PC, refer to "Maintenance-
[
2-3
]
S
y
stem
Control-S
y
stem Data Backu
p
-◆S
y
stem Data Restore" in the Pro
g
rammin
g
Item List.
Note
・After a s
y
stem data restore, the main unit must be restarted usin
g
the Web Maintenance Console.
Regular Automatic Backup Feature
The PBX regularly backs up the system data every 30 minutes.
The backup file is saved in the "Panasonic" folder in the internal memory of the main unit.
5.2 Software Upgrading
Obtaining software updates (downloading the update to the PBX) can be done manually via Web
Maintenance Console. In this case, software updates can be obtained from a USB memory device
connected to the PBX, or a PC that can access Web Maintenance Console.
Installing an update can be done either manually via Web Maintenance Console, or on a set schedule.
The software of the following types of devices and components can be updated:
Data Type Descri
p
tion
Main software data Operating system data area on the PBX’s mother board.
SIP extension software data*1 Firmware of supported SIP extensions
*1 Only Panasonic telephones are supported. For details about a specific telephone, refer to the
tele
p
hone's documentation.
Note
• The software version of the mother board can be confirmed throu
g
h s
y
stem
p
ro
g
rammin
g
.
• For details, refer to "Maintenance-
[
2-1
]
S
y
stem Control-Firmware Transfer to PBX" in the Pro
g
rammin
g
Item Lis
t
• For details, refer to "Maintenance-
[
2-2
]
S
y
stem Control-Firmware U
p
date to PB
X
" in the Pro
g
rammin
g
Item List.