2.1 Dialling mode (KX-MB1520/
KX-MB1530 only)
If you cannot dial (page 38), change this setting
according to your telephone line service.
1 MMenuN
2 Press MBNM1NM2NM0N to display “DIALLING MODE”.
3 Press M1N or M2N to select the desired setting.
M1N “PULSE”: For rotary/pulse dial service.
M2N “TONE” (default): For tone dial service.
4 MSetN
5 Press MMenuN to exit.
2.2 Selecting the operation mode
(Scan/Copy) (Fax: KX-MB1520/
KX-MB1530 only)
You can select the desired mode by pressing the
following button repeatedly.
KX-MB1500 KX-MB1520
KX-MB1530
– MFaxN (KX-MB1520/KX-MB1530 only): Select this
mode when using the unit as a fax machine
(page 38).
– MCopyN: Select this mode when using the unit as a
copier (page 31).
– MScanN: Select this mode when using the unit as a
scanner (page 28).
Note:
R The default operation mode is the copy mode.
R You can change the default operation mode (feature
#463 on page 54) and the timer before returning to
the default operation mode (feature #464 on
page 55) (KX-MB1520/KX-MB1530 only).
17
2. . Preparation
2. Preparation
To Next Page
Loading...
