1 Open the document cover (A).
2 Place the document FACE DOWN on the scanner
glass (B), aligning the top left of the document with
the corner where the
mark is positioned.
3 Close the document cover.
Note:
R Confirm that there are no documents in the automatic
document feeder (KX-MB1530 only).
R Place the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
R If the original is a book thicker than 15 mm, do not
close the document cover.
R Confirm that any ink, paste or correction fluid has
dried completely.
R Effective scanning area is shown by the shaded area:
Effective scanning area
3 Adjust the width of the document guides (C) to fit the
actual size of the document.
Note:
R Do not place the unit in an area where the document
sub tray may be easily bumped into.
R The order of multiple page documents will be
reversed after being fed through the automatic
18
2. Preparation