R If the time has not previously been set, Caller ID will
not adjust the clock.
2.6 Your logo (KX-MB1520/
KX-MB1530 only)
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
1 MMenuN A MBNM1NM0NM2N A MSetN
2 Enter your logo, up to 30 characters (see page 63
for character entry). A MSetN
3 Press MMenuN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
character, and make the correction.
R To erase all characters, press and hold MStopN.
21
2. Preparation
To Next Page
Loading...
