EasyManua.ls Logo

Panasonic KX-MB1500HX - 6.1.2 Using the Automatic Document Feeder; 6.2 Storing Items for the Phonebook

Panasonic KX-MB1500HX
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Printing a sending report
A sending report provides you with a printed record of
transmission results. To print the sending reports, make
sure that feature #401 is activated (page 56). For an
explanation of the messages, see page 66.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 82. To print it automatically after every 30 new
fax transmissions and receptions, make sure feature
#402 is activated (page 56). For an explanation of the
messages, see page 66.
6.1.2 Using the automatic document feeder
(KX-MB1530 only)
MFaxN
MSP-PhoneN
MStartN
1 If the MFaxN light is OFF, turn it ON by pressing
MFaxN repeatedly.
2 Set the original (page 18).
3 If necessary, change the resolution and contrast
according to the type of document.
R To select the contrast, see page 38.
R To select the resolution, see page 38.
4 MSP-PhoneN
5 Dial the fax number. A MStartN
Note:
R To stop sending, see page 65.
R Do not open the document cover when sending a fax
with the automatic document feeder.
Pre-dialling a fax number
1. Enter the fax number.
2. Set the original (page 18). A MStartN
Sending from memory (Quick scan feature)
Important:
R Make sure the quick scan feature is activated
beforehand (feature #419 on page 57).
1.
Set the original (page 18).
2. Enter the fax number. A MStartN
6.2 Storing items for the
phonebook
The unit provides the phonebook (100 items).
R Make sure that the MFaxN light is ON.
MFaxN
MSetN
MCNMDNMEN
MMenuNMStopN
6.2.1 Storing phonebook items
1 Press MMenuN repeatedly to display PHONEBOOK
SET. A MEN
2 Enter the name, up to 16 characters (see page 63
for character entry). A MSetN
3 Enter the telephone number, up to 32 digits. A
MSetN
R To program other items, repeat steps 2 to 3.
4 MMenuN
Note:
R A hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.2 Editing a stored item
1 Press MEN.
2 Press MCN or MDN repeatedly to display the desired
item. A MMenuN A MGN
3 Edit the name if necessary. A MSetN
4 Edit the telephone number if necessary. A MSetN
A MStopN
6.2.3 Erasing a stored item
1 Press MEN.
2 Press MCN or MDN repeatedly to display the desired
item. A MMenuN A MBN
R To cancel erasing, press MStopN.
3 MSetN A MStopN
39
6. Fax (KX-MB1520/KX-MB1530 only)

Table of Contents

Related product manuals