8.2 Basic features
Feature/Code Selection
Setting the date and time
MBNM1NM0NM1N
(KX-MB1520/KX-MB1530
only)
Enter the date and time using the dial keypad. See page 20 for details.
Setting your logo
MBNM1NM0NM2N
(KX-MB1520/KX-MB1530
only)
Enter your logo using the dial keypad. See page 21 for details.
Setting your fax number
MBNM1NM0NM3N
(KX-MB1520/KX-MB1530
only)
Enter your fax number using the dial keypad. See page 22 for details.
Selecting the language
MBNM1NM1NM0N
(KX-MB1500HX/
KX-MB1520EX/KX-MB1530EX
only)
The display and reports will be in the selected language.
R The location setting must also match your location. See feature #114 on
page 51.
M1N “ENGLISH”
M2N “CZECH”
M3N “SLOVAK”
M4N “HUNGARIAN”
1. MMenuN A MBNM1NM1NM0N
2. Press M1N to M4N to select the desired language. A MSetN A MMenuN
Note:
R The default may vary depending on the model.
Selecting the location where
you use
MBNM1NM1NM4N
(KX-MB1520EX/
KX-MB1530EX only)
This setting must match your location.
R The language setting is also available (feature #110 on page 51).
M1N “CZECH” (default): To use in Czech.
M2N “SLOVAKIA”: To use in Slovakia.
M3N “HUNGARY”: To use in Hungary.
Setting the dialling mode
MBNM1NM2NM0N
(KX-MB1520/KX-MB1530
only)
M1N “PULSE”
M2N “TONE” (default)
See page 17 for details.
Setting recall/flash time
MBNM1NM2NM1N
(KX-MB1520/KX-MB1530
only)
The recall/flash time depends on your telephone exchange or host PBX.
M0N “900ms”
M1N “700ms”
M2N “600ms”
M3N “400ms”
M4N “300ms”
M5N “250ms”
M6N “200ms”
M7N “160ms”
M8N “110ms”
M9N “100ms” (default)
MGN “90ms”
MBN “80ms”
Note:
R If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
51
8. Programmable Features
To Next Page
Loading...
