Panasonic KX-MB1500HX - Beep Sounds and Keytone Settings; Off-Hook Alert Setting; Job End Notification Feature; Ring Count in FAX ONLY Mode

Feature/Code Selection
Setting the beep sounds and
keytones
MBNM1NM6NM5N
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear confirmation/error beep sounds and keytones.
Note:
R Even if this feature is set to “OFF”, the unit beeps in some cases. For
example:
– the memory reception alert setting (feature #437 on page 59) is
activated (KX-MB1520/KX-MB1530 only).
– the front cover is opened.
Setting the off-hook alert
MBNM1NM7NM1N
(KX-MB1520/KX-MB1530
only)
To alert you with a beeping sound when the telephone line has been left
off-hook for more than 1 minute without dialling.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You have to press MStopN or MSP-PhoneN to stop the
beeping sound.
Setting the job end
notification feature
MBNM1NM7NM4N
(KX-MB1530 only)
To set the unit to alert you with a beeping sound after the print job is finished.
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: Beep sounds will be made after documents are printed.
Note:
R This setting is valid for PC printing, printing received faxes, and printing
reports/lists automatically.
R When a printing error occurs, the unit will beep the error beep instead of this
beep, even if this feature is set to “ON”.
Changing the ring count in
FAX ONLY mode
MBNM2NM1NM0N
(KX-MB1520/KX-MB1530
only)
KX-MB1520EX/KX-MB1530EX:
M2N “2” (default)
M3N “3”
M4N “4”
M5N “5”
KX-MB1520FX/KX-MB1530FX:
M1N “1”
M2N “2” (default)
M3N “3”
M4N “4”
M5N “5”
M6N “6”
M7N “7”
M8N “8”
M9N “9”
Note:
R If you are using the unit with an answering machine, set to more than 4
(page 45).
Setting the Caller ID list to
print automatically
MBNM2NM1NM6N
(KX-MB1520/KX-MB1530
only)
M0N “OFF” (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30 callers.
M1N “ON”: The unit will print the Caller ID list automatically after every 30 new
calls (page 48).
Setting the time adjustment
MBNM2NM2NM6N
(KX-MB1520/KX-MB1530
only)
Using this feature, the unit’s date and time setting will be automatically adjusted
when caller information is received.
M1N “AUTO”: The date and time setting will be automatically adjusted.
M2N “MANUAL” (default): Deactivates this feature.
53
8. Programmable Features