Feature/Code Selection
Setting the default operation
mode timer
MBNM4NM6NM4N
(KX-MB1520/KX-MB1530
only)
To set the timer before returning to the default operation mode (feature #463).
M0N “OFF”: Deactivates this feature.
M1N “30s”: 30 seconds
M2N “1min” (default): 1 minute
M3N “2min”: 2 minutes
M4N “5min”: 5 minutes
Setting toner save feature
MBNM4NM8NM2N
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: The toner cartridge will last longer.
Note:
R This feature may lower the print quality by reducing toner consumption.
R This setting is valid for copying, and when the unit prints reports/lists.
R This setting is invalid for printing received faxes (KX-MB1520/KX-MB1530
only).
Setting the reordering
feature
MBNM4NM9NM6N
(KX-MB1530 only)
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: After passing multiple page documents through the automatic
document feeder, “REORDER DOC.?” is displayed.
To return the documents to their original order:
1. While “REORDER DOC.?” is displayed, press MSetN.
R To cancel reordering the documents, press MStopN.
2. Insert the document FACE DOWN into the automatic document feeder
again. A MStartN
Note:
R Documents can be reordered at any time, even when this feature is not
activated. See page 65 for details.
55
8. Programmable Features
To Next Page
Loading...
