8.6 Scan features
Feature/Code Selection
Setting the scan mode for
Push Scan
MBNM4NM9NM3N
M1N “VIEWER” (default): The scanned image will be displayed in the
[Multi-Function Viewer] window.
M2N “FILE”: The scanned image will be saved as a file.
M3N “EMAIL”: The scanned image will be saved for email attachment.
M4N “OCR”: The scanned image will be displayed in the OCR window.
Note:
R The OCR software is not supplied. To use OCR software, you need to
specify the path of the OCR software (page 28).
Holding the previous
scanning parameter for Push
Scan
MBNM4NM9NM4N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous scan settings for each mode of
push scan.
62
8. Programmable Features
To Next Page
Loading...
