10. Useful Information
61
10.2.2 Using Device Monitor
You can confirm the setting information and current
status of the unit from your computer.
1 Start Multi-Function Station.
2 [Utilities] i [Device Monitor]
L The [Device Monitor] window will appear.
3 Confirm the status of the unit.
[Status]: Current status of the unit
Note:
L Additional information (toner and recording paper
status, unit information, etc.) will be displayed in
[Status] tab by clicking [Advanced Information].
L The status of the unit will be updated by clicking
[Refresh].
L If a printing error occurs, the Device Monitor will be
started automatically and display the error
information.
L For details, see the help file by selecting [p] from
Multi-Function Station.
10.2.3 Using the web browser (KX-MB781,
LAN connection only)
You can confirm the setting information and status of the
unit from the web browser.
1 Start Multi-Function Station. i [Utilities] i
[Configuration Web Page]
L You can also access the unit by entering its IP
address on the web browser.
2 Select the category from the menu bar.
[Status]: Toner and paper information, etc.
[Device]: Current status of the unit, etc.
[Network]: Network information, etc.
L When you select [Device] or [Network], you
can change which features are displayed by
clicking the feature tabs at the top of the right
frame.
3 Confirm the status of the unit.
Note:
L The status of the unit will be updated by clicking
[Reload].
10.3 Canceling the operations
You can cancel the current operation from the unit. You
can also select the desired operation to cancel.
1 {STOP}
L “USER STOPPED” is displayed.
L When “USER STOPPED” is not displayed, go to
step 2.
2 To cancel printing:
Press {STOP} repeatedly to display “STOP
PRINTING?”.
To cancel scanning:
Press {STOP} repeatedly to display “STOP
SCANNING?”.
To cancel copying:
Press {STOP} repeatedly to display “STOP
COPYING?”.
To cancel sending or receiving faxes (KX-MB781
only):
Press {STOP} repeatedly to display “STOP FAX?”.
To cancel broadcast transmission (KX-MB781
only):
Press {STOP} repeatedly to display “BROAD
CANCELED?”.
To cancel fax redialing (KX-MB781 only):
Press {STOP} repeatedly to display “SEND
CANCELED?”.
3 {SET}
MB271-781-PFQX2722ZA-OI-en.book Page 61 Tuesday, May 22, 2007 5:20 PM
To Next Page
Loading...
