Panasonic KX MC6020 - Color Laser - All-in-One - Page 179

179
KX-MC6020HX
OK means “can set”.
NG means “can not set”.
Note:
Refer to Service Function Table (P.159) for descriptions of the individual codes.
Example:
If you want to set value in the “401 PRINT SENDING REPORT”, press the dial key number 1, 2 or 3 corresponding to the Set
Value you want to select. (1:ERROR/2:ON/3:OFF)
874 DTMF ON time 060~200msec 100 OK
875 DTMF OFF time 060~200msec 100 OK
876 Skew Correction 1: Valid / 2: Invalid Valid OK
877 Color Registration Detection Timing 0~65535 250 NG
880 History list --------- --------- NG
881 Journal 2 --------- --------- NG
882 Journal 3 --------- --------- NG
884 History --------- --------- NG
978 Color Registration Correction -------- --------- NG
979 Color Registration and Sensor Correction -------- --------- NG
991 Setup list 1:Start --------- OK
994 Journal list 1:Start --------- OK
995 Journal 2 list 1:Start --------- OK
996 Journal 3 list 1:Start --------- OK
998 History list 1:Start --------- OK
999 Service list 1:Start --------- OK
Code Function Set Value Default Remote Setting