362
KX-MC6020HX
11 Check the message on the LCD.
If the following is displayed, the Color Registration Skew Adjustment is not required. Go to the step 16.
If the following is displayed, the Color Registration Skew Adjustment is required. Go to the step 12.
12 Open the front cover, then remove the Drum Cartridge Holder Unit with the lock levers.
13 Adjustment of Drum Cartridge Supporter Position
<When the following message is displayed:>
1. Loosen the 2 screws (B). [Do not loosen the 2 screws (A), or the poor print quality will be generated.]
2. Move the Drum Cartridge Supporter (1) the aaa/100mm in the direction of the arrow (left).
3. Tighten the 2 screws (B).
<When the following message is displayed:>
1. Loosen the 2 screws (B). [Do not loosen the 2 screws (A), or the poor print quality will be generated.]
2. Move the Drum Cartridge Supporter (1) the aaa/100mm in the direction of the arrow (right).
3. Tighten the 2 screws (B).
Step Operation
To Next Page
Loading...
