5.28 [3-10] Conference Group—Member List
Up to 31 members can be assigned to each conference group. Select the group to programme from the
Conference Group No. list.
When
Broadcast Mode is set to
"Disable", only up to 7 members can be assigned to a group. All of these
members are automatically allowed to speak when the call starts.
To copy the numbers to another group, click Member list copy, select the group to copy to, and click OK.
To assign destinations for conference groups easily, click Extension No. Setting (see 2.1.6 Extension
Number Setting).
Dial Number
Specifies the destination number of each member of the conference group.
Value Range
Max. 32 digits (consisting of 0–
9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
5.28 [3-10] Conference Group—Member List
Programming Manual References
5.27 [3-10] Conference Group
Feature Guide References
1.15.1 Conference Group Call
Extension Name
Indicates the name of the extension, when an extension number is specified in
Dial Number above
(reference only).
Value Range
Max. 20 characters
Maintenance Console Location
5.28 [3-10] Conference Group—Member List
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings
Feature Guide References
1.15.1 Conference Group Call
672 PC Programming Manual
5.28 [3-10] Conference Group—Member List
To Next Page
Loading...
